Muyang MUTZ Series Conditioner

MUTZ series Conditioner developed by Muyang itself (hereinafter referred to as conditioner) is mainly applicable for preprocessing product before pelletizing or extrusion, so as to achieve good pellet quality. During conditioning, steam applied into the conditioner can ensure sufficient moisture is absorbed by the product and the temperature is rose as well, which improve product forming performance, facilitate.

The conditioner is composed of cylinders, rotors, driving device and access doors etc. The rotors are installed on the cylinders through the bearings with pedestal at their two ends. Speed variable motor is adopted to drive the driving device; there are access doors installed on the cylinders for easy maintenance and adjustment. Main components of this feed machinery, such as rotor (including main shaft, paddles and so on), cylinder are all made of stainless steel.

After fed into the conditioner from the inlet of upper cylinder, the material is blended and pushed forward by the rotors and then is discharged out from the outlet at the other end. For the material inlet of each cylinder, there is a steam inlet, from which steam of certain pressure and flow rate will be injected into the conditioner to heat and moisturize the material and complete the conditioning process. The conditioning time is determined by the rotary speed of speed variable motor and the angle of paddles as well as the structure of conditioner.