Jet Filter Dust Collector

How to choose the most suitable dust collector for agricultural production is very important, in general, it can be chosen based on the following factors:

Air volume
Air volume is the removal device which can purify volume of gas in the unit time. According to the wind baghouse, generally we can not make dust exceeds the amount of wind in the case of running, otherwise, the bag is easy to be pluged, shortening expectancy.

Temperature
To the dust collector, the temperature depends on two factors, the first one is the maximum temperature of the filter, and the second is the gas temperature must be above the dew point.

Inlet and outlet dust concentration
It can be decided for dust point, and in the design or selection, it is second factor. Inlet dust concentration will directly affect the wear and bags's discharge capabilities. Outlet dust concentration should be sized to local environmental requirements or the user's requirements.

Pressure loss
Generally, the loss refers to the pressure loss of the device structure, the filter and the dust layer deposited on the filter pressure loss. Also, the operating pressure and filtration rate also greatly influence our choices.

Now, I am here to introduce you four Muyang dust collectors, and you can make your choice according to following details:

1. LNGM Series High Pressure Jet Filter Dust Collector



Features: Design with dust pre-settlement, prolong seivice life of filtering bags; quick ba chaning device, ease of use.
Application: Dust collection on a dumping pit, a pneumatic conveying system and etc.
Working air-pressure:0.2-0.4 MPa.
Filtering area: 18m², 27m², 30m², 35m², 45m², 54m², 63m², 72m², 81m², 90m², 117m², 228m².

2. TBLMy Series High Pressure Jet Filter Dust Collector



Features: Cyclone principle adopted for dust separation and settlement, prolonged service life of filtering bags; quick bag changing device, ease of labor.
Application: Dust collection on a dumping pit, a pneumatic conveying system and etc.
Working air-pressure:0.2-0.4 MPa.
Filtering area: 5.6m², 10.5m², 17.5m², 25.2m², 36.4m², 53.2m², 113.4m², 163.8m².

3. TBLMb Series High Pressure Jet Filter Dust Collector



Features: With flat filtering envelopes, compact structure and small footprint.
Application: Dust collection on conveying equipment.
Working air-pressure:0.2-0.4 MPa.
Filtering area: 2m², 3m², 6m², 9m², 12m²

4. TBLMD Series Low Pressure Jet Filter Dust Collector



Features: Cyclone principle adopted for dust separation and settlement, prolonged service life of filtering bags; quick bag changing device, ease of labor.
Application: Dust collection on a dumping pit, a pneumatic conveying system and etc.
Working air-pressure: 0.03-0.08 MPa.
Filtering area: 13.5m², 19.5m², 6m², 29.3m², 39.2m², 58.5m², 78m², 97.5m².