Muyang will showcase a new pellet mill at a 445.5m2 booth during VIV China 2014, held on September 23-25.
The 35T/H pellet mill is the first gear drive press in the FAMSUN pellet mill family. It is developed by the European Institute of Muyang Company.
Driven by a 250kW motor, the feed machine can produce high quality pellets steadily above 35 tonnes/hour without downtime. Besides the exhibited press, a model of 25T/H capacity is also available for this gear drive series to meet different production demands.
The FAMSUN MY 120 Twin-Screw Extruder and the FAMSUN-WEM Automation System will also be showcased and is marketed to aqua feed producers.
In addition, FAMSUN's delicate cage raising systems, flat raising steel structure houses, pig penning systems and farm climate control systems will be seen at VIV China.
Showing posts with label Feed Machine. Show all posts
Showing posts with label Feed Machine. Show all posts
6/09/2014
Muyang Accelerate the Pace of Internationalization
Recently, Muyang, in the 12th Livestock Exposition, released a new brand identity: FAMSUN. From MUYANG to FAMSUN, the domestic feed machinery industry leading brand was accelerating the pace of internationalization. President Fan Tianming of Muyang said it would continue through technological innovation and industrial chain extension to make FAMSUN into a world-class brand.
Behind the releasing the new brand, Muyang indicated the strategic intent to expand overseas market, and now Muyang products already covered more than one hundred countries and regions worldwide, extending the service to whole industry chain.
It is understood that Muyang continued innovation in product development, fully tapped the potential of alternative raw materials. Previous extruder raw protein content was very high, and we should use fish meal to produce. Muyang now developed a new extruder, other materials can be processed like cassava. Previous extruder was difficult to be used in the cassava protein, while the new device was able to destroy the peptide bond absorption, and it can be utilized as the raw material. With this new equipment, feather meal can be used as feed ingredients. There are a lot of feather protein, but due to the peptide bond was very long, the animals can not properly digest. The new device may be converted to a protein in general, so that the animal can be absorbed. By reducing the requirements for the raw material processing equipment, the use of raw materials for production substitutability, greatly reduce the production cost of feed.
In recent years, independent research and development of core machinery by Muyang have passed through the EU certification, capturing the stringent EU product standards. Today, Muyang's products have been sold to 102 countries and territories worldwide.
Currently, both the feed industry and feed equipment manufacturing, are facing with large-scale, intelligent development trend of the industry for feed production machinery and equipment suppliers, research and service capacity of a test. Feed machine manufacturing enterprises need to provide more large-scale, intelligent feed processing equipment to meet customer demand for the efficient production of large quantities of high-quality feed products.
Muyang's new brand strategy is designed to scale and intelligent development, and through the exchange of knowledge, skills, experience sharing to help customers to create system solutions on "from pastoral to table" around the world and meet the challenges of food security and sustainable development.
Behind the releasing the new brand, Muyang indicated the strategic intent to expand overseas market, and now Muyang products already covered more than one hundred countries and regions worldwide, extending the service to whole industry chain.
It is understood that Muyang continued innovation in product development, fully tapped the potential of alternative raw materials. Previous extruder raw protein content was very high, and we should use fish meal to produce. Muyang now developed a new extruder, other materials can be processed like cassava. Previous extruder was difficult to be used in the cassava protein, while the new device was able to destroy the peptide bond absorption, and it can be utilized as the raw material. With this new equipment, feather meal can be used as feed ingredients. There are a lot of feather protein, but due to the peptide bond was very long, the animals can not properly digest. The new device may be converted to a protein in general, so that the animal can be absorbed. By reducing the requirements for the raw material processing equipment, the use of raw materials for production substitutability, greatly reduce the production cost of feed.
In recent years, independent research and development of core machinery by Muyang have passed through the EU certification, capturing the stringent EU product standards. Today, Muyang's products have been sold to 102 countries and territories worldwide.
Currently, both the feed industry and feed equipment manufacturing, are facing with large-scale, intelligent development trend of the industry for feed production machinery and equipment suppliers, research and service capacity of a test. Feed machine manufacturing enterprises need to provide more large-scale, intelligent feed processing equipment to meet customer demand for the efficient production of large quantities of high-quality feed products.
Muyang's new brand strategy is designed to scale and intelligent development, and through the exchange of knowledge, skills, experience sharing to help customers to create system solutions on "from pastoral to table" around the world and meet the challenges of food security and sustainable development.
8/21/2013
Personal Protection: Countermeasures against Accidents
1. All the mechanical equipments produced by Jiangsu Muyang Group are equipped with safety devices, which are consistent with modern technical level and universally effective safety rules prior to ex works, so that the customers can use the machines in accordance with the regulations.
2. Enterprises are obligate to execute following regulations to guarantee operators' safety.
3. The shield caps for belts and chains must be mounted and closed at any moment. It is very dangerous to personal safety, if they are open or disassembled. This point is also applicable for the preventive device of manipulator.
4. The safety limit switches, interlinking cylinders, revolution monitors and solenoid valves or locking electromagnets of the door interlocking devices should always be kept in good order. The safety limit switch may not be overlapped or discarded.
5. The grating cover plate on the grinding machine, grid bar or guard grating are usually installed and delivered together with the machine. They can only be disassembled with tools. And the machines with such kind of devices can never put into work until the above-said devices have been properly installed.
6. The driving motor must be switched off completely when carrying out inspection, commissioning, repair and maintenance. This can be realized through a full-phase separating and lockable switch installed near the machine or on the operation desk and control panel on the site. It is not enough only to screw off the fuse wire!
7. If the grinding machines need other energy like pneumatic, hydraulic, steam and hot water energy, it is necessary to cut off their energy supply or turn off the switch, and eliminate the pressure in the internal pipeline system of the machine.
8. As for handling heated or cooled parts and components of the machine, especial care should still be taken for the danger of burning possibility.
9. If you have pressed the emergency stop switch to stop the machine and you want to reset the switch, so it is not permissible to only re-press this button to restart the machine. And the machine can only be started by re -closing the main switch first.
10. If some machines are equipped with a local shutdown system, especial care should be taken. Read the instruction manuals attached with the machine carefully. In such machines with a local shutdown system, temperature will rise because pressure or vac uum will occur after they have been used for a period.
11. If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid.
12. The cleaning, lubricating and oiling of the grinding machinery or its parts and components may be carried out only when the machine is stopped. If you must climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: the power supply of motors must be cut off completely and the switch must be locked!
13. Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine.
14. Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to dust explosion prevention.
15. If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators.
16. In production operation, the feed machine must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.
17. Please execute the special regulations on accidents prevention in the operating instructions provided by us.
18. Only the trained professionals are allowed to operate the machine and equipment manufactured by our Company.
19. Measures for environmental protection if you decide not to use the machine any longer, the measures for environmental protection and reutilization should be taken: drain the liquids inside the machine (like motor oil, gearbox oil, brake oil and coolant etc.) into special containers and send them to the preparation workshop. The plastic parts shall be picked out for reutilization. The metal parts shall be sorted out so as to be crushed or scraped.
2. Enterprises are obligate to execute following regulations to guarantee operators' safety.
3. The shield caps for belts and chains must be mounted and closed at any moment. It is very dangerous to personal safety, if they are open or disassembled. This point is also applicable for the preventive device of manipulator.
4. The safety limit switches, interlinking cylinders, revolution monitors and solenoid valves or locking electromagnets of the door interlocking devices should always be kept in good order. The safety limit switch may not be overlapped or discarded.
5. The grating cover plate on the grinding machine, grid bar or guard grating are usually installed and delivered together with the machine. They can only be disassembled with tools. And the machines with such kind of devices can never put into work until the above-said devices have been properly installed.
6. The driving motor must be switched off completely when carrying out inspection, commissioning, repair and maintenance. This can be realized through a full-phase separating and lockable switch installed near the machine or on the operation desk and control panel on the site. It is not enough only to screw off the fuse wire!
7. If the grinding machines need other energy like pneumatic, hydraulic, steam and hot water energy, it is necessary to cut off their energy supply or turn off the switch, and eliminate the pressure in the internal pipeline system of the machine.
8. As for handling heated or cooled parts and components of the machine, especial care should still be taken for the danger of burning possibility.
9. If you have pressed the emergency stop switch to stop the machine and you want to reset the switch, so it is not permissible to only re-press this button to restart the machine. And the machine can only be started by re -closing the main switch first.
10. If some machines are equipped with a local shutdown system, especial care should be taken. Read the instruction manuals attached with the machine carefully. In such machines with a local shutdown system, temperature will rise because pressure or vac uum will occur after they have been used for a period.
11. If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid.
12. The cleaning, lubricating and oiling of the grinding machinery or its parts and components may be carried out only when the machine is stopped. If you must climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: the power supply of motors must be cut off completely and the switch must be locked!
13. Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine.
14. Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to dust explosion prevention.
15. If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators.
16. In production operation, the feed machine must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.
17. Please execute the special regulations on accidents prevention in the operating instructions provided by us.
18. Only the trained professionals are allowed to operate the machine and equipment manufactured by our Company.
19. Measures for environmental protection if you decide not to use the machine any longer, the measures for environmental protection and reutilization should be taken: drain the liquids inside the machine (like motor oil, gearbox oil, brake oil and coolant etc.) into special containers and send them to the preparation workshop. The plastic parts shall be picked out for reutilization. The metal parts shall be sorted out so as to be crushed or scraped.
6/13/2013
Muyang Grinding Hammer Mill
Welcome to Muyang Group!
If you want to shred or crush aggregate material into smaller pieces on your farm, you need to use hammer mill whose basic principle is straightforward. A hammermill is essentially a steel drum containing a vertical or horizontal rotating shaft or drum on which hammers are mounted. The hammers are free to swing on the ends of the cross, or fixed to the central rotor. The rotor is spun at a high speed inside the drum while material is fed into a feed hopper. The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size. The hammermill can be used as a primary, secondary, or tertiary crusher.
Muyang Grinding Hammer Mill is most customers' choices as they can help them save 30 million yuanes per year. Now, I will tell you why you should choose Muyang Feed Machine, there are three reasons here:
1. High capacity
China authority proves and lots of customers witness on the scene, Muyang Third Gerneration SWFP Series Fine-Grinding Hammermill has made revolutionary breakthroughs in performance.
①Guangxi HuaGang: crushing corn, moisture 13.8%
Φ1.0mm, measured capacity up to 15.23 t/h, ton power consumption low to 11.2 kW*h/t
Φ1.5mm, measured capacity up to 16.80 t/h(Maximum up to 18.93 t/h), ton power consumption low to10.2 kW*h/t
②Wuhu Tequ: crushing corn, moisture 11.2%
Φ2.0mm，measured capacity up to 30.7t/h, ton power consumption low to 5.28kW.h/t
2. Low power
One machine (160kW) can yearly save 498,000 kWh and reduce cost of 298,800 yuanes. Hence, choosing SWFP series, saving 30 million per year in ultra-fine grinding is no longer a dream.
3. Superstable running
Helped by Special grinding chamber optimization design, the current keeps stable in the process of grinding running with fluctuations not more than 2%. Taking feed company of annual output 100,000 tons as an example, it needs about 60,000 tons of corn to crush, compared with double rotor crusher, Muyang Third Generation SWFP Series Fine-Grinding Hammermill (SWFP66 × 100C, 160kW) can save about 8.3 kW.h / t, equal to 498,000 kWh of electricity per year, a reduce of annual cost 298,800 yuanes according to 0.6 yuan/ kilowatt-hour.
Series Fine-Grinding Hammermill can realize significantly higher capacity and lower ton power consumption, and it is suitable for coarse-grinding and micro-grinding of various granular grain materials, such as corn, sorghum, rice, wheat, soybean meal, cottonseed meal, rapeseed meal. It is also appliable for micro-grinding of various large, medium and small-sized aquatic feed and special feed production. It is also suitable for micro-grinding in the industry of pharmaceutical, alcohol and solvent.
So, if you want to know more on Muyang Products, you can visit here : http://www.machineryshops.com/, and I believe you can find your ideal one.
If you want to shred or crush aggregate material into smaller pieces on your farm, you need to use hammer mill whose basic principle is straightforward. A hammermill is essentially a steel drum containing a vertical or horizontal rotating shaft or drum on which hammers are mounted. The hammers are free to swing on the ends of the cross, or fixed to the central rotor. The rotor is spun at a high speed inside the drum while material is fed into a feed hopper. The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size. The hammermill can be used as a primary, secondary, or tertiary crusher.
Muyang Grinding Hammer Mill is most customers' choices as they can help them save 30 million yuanes per year. Now, I will tell you why you should choose Muyang Feed Machine, there are three reasons here:
1. High capacity
China authority proves and lots of customers witness on the scene, Muyang Third Gerneration SWFP Series Fine-Grinding Hammermill has made revolutionary breakthroughs in performance.
①Guangxi HuaGang: crushing corn, moisture 13.8%
Φ1.0mm, measured capacity up to 15.23 t/h, ton power consumption low to 11.2 kW*h/t
Φ1.5mm, measured capacity up to 16.80 t/h(Maximum up to 18.93 t/h), ton power consumption low to10.2 kW*h/t
②Wuhu Tequ: crushing corn, moisture 11.2%
Φ2.0mm，measured capacity up to 30.7t/h, ton power consumption low to 5.28kW.h/t
2. Low power
One machine (160kW) can yearly save 498,000 kWh and reduce cost of 298,800 yuanes. Hence, choosing SWFP series, saving 30 million per year in ultra-fine grinding is no longer a dream.
3. Superstable running
Helped by Special grinding chamber optimization design, the current keeps stable in the process of grinding running with fluctuations not more than 2%. Taking feed company of annual output 100,000 tons as an example, it needs about 60,000 tons of corn to crush, compared with double rotor crusher, Muyang Third Generation SWFP Series Fine-Grinding Hammermill (SWFP66 × 100C, 160kW) can save about 8.3 kW.h / t, equal to 498,000 kWh of electricity per year, a reduce of annual cost 298,800 yuanes according to 0.6 yuan/ kilowatt-hour.
Series Fine-Grinding Hammermill can realize significantly higher capacity and lower ton power consumption, and it is suitable for coarse-grinding and micro-grinding of various granular grain materials, such as corn, sorghum, rice, wheat, soybean meal, cottonseed meal, rapeseed meal. It is also appliable for micro-grinding of various large, medium and small-sized aquatic feed and special feed production. It is also suitable for micro-grinding in the industry of pharmaceutical, alcohol and solvent.
So, if you want to know more on Muyang Products, you can visit here : http://www.machineryshops.com/, and I believe you can find your ideal one.
Subscribe to:
Posts (Atom)