Muyang SFJZ Vibrating Sifter

This SFJZ vibrating sifter consists of a feeding inlet, a feeding outlet, an exhaust opening, a sieve body, vibrating motors, rubber springs and a feed machine frame.

The feeding inlet is flexibly connected with a spout, and through the adjustable baffle plates the materials are distributed and then drop onto the sieve cover. Due to the obstruction of baffles for uniform distribution, the materials are further evenly spread over the first and second sieve covers for sifting. The stocks with different particle size will be discharged out of the machine via different outlets.

Working conditions
(1) Environmental conditions
① Environment temperature for normal use is within -15～+40℃;
② Relative moisture content for normal use is within 30%~85%;
③ Altitude for normal use is lower than 1000 m;
(2) Configuration conditions
① The vibrating sifter should match with the complete sets of equipments in the process;
② Configuration shall be carried out within the power supply for normal use (permissible voltage deviation ±5% and frequency deviation ±1 HZ);
③ The user must configure an over-voltage protection device for the power supply.

Muyang SJHS Mixer Machine

Mixing is important to the quality and the feeding effectiveness of compound feed (or premix) during production. The production capacity of a feed mill usually is determined by its batching and mixing ability. 

Muyang SJHS series Double-circle Paddle Mixer, designed with feed-to-food safety standard, is effective in mixing powdery ingredients (bulk density< 1kg/l) for animal feed, food and pet food. Liquid application is available. 

Efficient and homogenous
Double-circle rotor contributes to fully mixing in both fast-flow zone and slow-flow zone, the mixing period is as short as 45-60s, but the homogeneity of product can be up to 97.7%.

Minimum residue
Optimized paddle-to-wall gap and fully opened discharge gates of the feed machine ensure momentary discharging, minimum residue and free of contamination.

No leakage
Assembly type seals for the discharge gates and shaft ends, good in sealing and convenient in assembly and adjustment as well as replacement operations.

User friendliness
Large access door, ease of cleaning and maintenance; Safety switch to protect personel from injury during cleaning and maintenacnce.

Dust Discharging Device of LNGM Dust Collector

The Dust discharging device of this series dust collector is mainly composed of a packing auger and an airlock. There are three forms: dust discharging by a conic bunker is equipped with only an airlock, single packing auger and double packing auger dust discharging are equipped with one airlock and two airlocks, and the packing auger is powered by the drive motor of the airlock. A hanging bearing is set in the middle of the double-auger.

The impulse control instrument on the feed machine is a main control device for air jet and dust discharging system of the dust collector, and completed with imported digital integrated circuits, which is characterized by stability and reliability, strong interference resistance, long service life and convenient adjustment. Correct setting of impulse width and impulse interval is a key factor for normal work of the dust removal system.

Technical performance: 1. Adjusting scope of impulse width: 0.03s ~ 0.3s; 2. Adjusting scope of impulse interval: 3s ~60s; 3. Output voltage: AC 24V; output current: 0.8 A ~1A; 4. Output circuit: 1~60 for option or matched with quantity of the solenoid valves for the dust collector.

CP Group and Muyang Enjoy a long, Special Ties

On November 1, 2010, Mr. Dhanin Chearavanont, Chairman of CP Group, met with visiting Muyang Chairman Li Minyue in Bangkok. Both sides held an in-depth talk on the development of standardized feed processing technology and the long-term cooperation relationship between CP and Muyang.

CP Group is the largest feed machine manufacturer in the world while Muyang is the global leading integrated solution supplier in feed industry. The many years’ cooperation relationship has benefited both sides’ rapid expansion in China and other parts of the world.

Mr. Chearavanont gave highly credit for the professional, rapid reaction and characteristic service that brought by Muyang and believed that the two groups will be in a more solid relationship in the future. Mr. Li Minyue owed the present achievements of Muyang to the on-going support of many key customers like CP Group, and said that Muyang will always entertain excellent contacts with all important customers with the "key customer strategy" and "internationalization strategy" in mind and commit itself to creating more value for the customers worldwide.